Digione Signature

  • 产品分类: ALLO产品代理
  • 首页推荐:
  • 排序值: 0

    产品详细

    Our regular DigiOne has no equal.

    In our quest for digital perfection we asked how we can improve the design and give you the ultimate DigiOne.

    First, we decided to use more board space (we are using 2 boards), the PCB area increased 220%. First board is the “dirty side” and top board has the “clean side”. With the extra space, we used the best decoupling capacitors (film) on everything that’s important (clocks, buffers, flip flops). Also, with this extra space we added a supercap on the “clean side” so most of the electrons come from this onboard “buffer” (there is so much power onboard that DigiOne Sig can run a few seconds without any power attached to the clean side).

    We also decided to use 2 power supplies. The “dirty power” needs 5V /2-3A (RPI power). The “clean side” needs about 100mA and accepts from 5V to 6V. You can use anything on it, linear power supply or pure batteries power.

    Thirdly, we changed the clocks to the latest from NDK (ultralow jitter SDA) that have lower phase noise than the previous generation.

    REMEBER!
    The Digione Signature needs 2 PSUs to run.
    You can purchase 1 x  to feed the dirty side.
    We strongly recommend you purchase the  or use a very good power supply for the clean side.

    If you want to use the Digione Signature right away, you can purchase an additional  from us, but we dont recommend this set up.


    关于我们

    深圳市珀璞家电技术有限公司是一家从事家庭音响设计、生产、销售为一体的专业公司, 公司所拥有的“璞 Popu”音响品牌,自2007年进入市场以来,凭借一流的设计, 过硬的生产质量和经销商的真诚合作,已在广大客户中建立了良好的品牌知名度和信誉度。

    了解更多...

    联系我们

    • 公司地址:

      中国 广东省 深圳市 福田区新洲路新洲大厦C栋P层8号

    • 电话: +(86) 0755-83300989
      传真: +(86) 0755-23931166
      邮箱:  szpopu@126.com